CURRENTLY SOLD OUT
About this product
Product Information
The Kenwood TM-V7A Radio Transceiver is an amateur, two-way, VHF/UHF radio with visual scan, DTMF hand mic, and 280 memory channels in a mobile unit. The Kenwood TM-V7A Radio Transceiver has a blue LCD screen with white letters, which can be reversed to display blue letters on a white background. This radio features auto repeater offset, a guide function, screen display dimmer, and auto simplex checker. In addition, the Kenwood TM-V7A Radio Transceiver has DTSS selective call, PL Decode/Encode, Packet 1200/9600 DIN, and Hi/Med/Lo RF output. Antenna impedance for the Kenwood TM-V7A dual band Radio Transceiver is 50 ohms with a current drive receive of 144/440 megahertz less than 1 A. Current drain transmit is 144 megahertz less than 11 A and 440 megahertz less than 10 A. The Kenwood TM-V7A Radio Transceiver frequency range at 440 megahertz: TX is 430 to 450 megahertz and RX: 410 to 470 megahertz. At 144 megahertz, it is TX 144 to 148 megahertz and RX 118 to 174 megahertz. Frequency tolerance for the Kenwood TM-V7A Radio Transceiver is +/- 3 ppm, and the microphone impedance is 600 ohms. The front panel houses the power switch, which must be held for 1 second to turn the unit on or off. The PM switch operates the programmable memory. The Kenwood TM-V7A radio front case also has an MNU button to access the display menu, right-side volume and band select, right-side squelch, control select, left-side volume and band select, left-side squelch, and a power-level switch to change to Lo, Medium, or Hi power. A Rev switch allows the user to listen on repeater input, and the Tone switch enables PL tone. There is also a function switch, tuning knob, channel memory select, VFO select, and Call switch. The lock switch is located on the back of the microphone. The Kenwood TM-V7A Radio Transceiver features double conversion superheterodyne circuitry and has audio output power of more than 2 watts at 8 ohms with 5 percent distortion. Intermediate frequency first IF is 144 megahertz: 38.85 megahertz, 440 megahertz: 45.05 megahertz. Intermediate frequency second IF is 144 megahertz: 450 kilohertz and 440 megahertz: 455 kilohertz. Selectivity for the Kenwood TM-V7A dual band Radio Transceiver at -6 decibels is more than 12 kilohertz, while selectivity at -60 decibels is less than 28 kilohertz. Sensitivity at 12 decibels SINAD is 144 megahertz: less than 0.16 +/- V, and 440 megahertz: less than 0.16 +/- V. Squelch sensitivity on the Kenwood TM-V7A Radio Transceiver is 144 megahertz: less than 0.1 uV, and 440 megahertz: less than 0.1uV. The Kenwood TM-V7A Radio Transceiver transmitter maximum frequency deviation is less than +/- 5 kilohertz. The Kenwood TM-V7A Radio Transceiver uses reactance modulation with modulation distortion of less than 3 percent (300 hertz to 3 kilohertz). Radio frequency output power for the Kenwood TM-V7A Radio Transceiver on Hi is 144 megahertz: 50 watts and 440 megahertz: 35 watts. Output power on Mid is 10 watts, and on the Lo setting, it is 5 watts. Spurious radiation on the Kenwood TM-V7A Radio Transceiver is less than -60 dB. The Kenwood TM V7A Radio is an amateur VHF/UHF radio with power options and a wide range of transmit and receive capability in a compact mobile radio with reversible display and is designed for vehicle or desktop use.Product Identifiers
BrandKenwood
ModelTM V7A
eBay Product ID (ePID)129623474
Product Key Features
Supported ModesFm
Additional Product Features
TypeMobile/In-Vehicle
Ratings and Reviews
Most relevant reviews
- Dec 20, 2015
Iconic dual bander
Easy to program. Display can be customized in a few ways. Memory channels can have the memory number, frequency and a text label stored. Dual receive on same band or both bands. Cross band repeat. Voice announcements possible with VS3 module. Remote mountable with separation kit. Speaker output can even be customized based on band and internal/external speaker options.Verified purchase: YesCondition: Pre-owned
