There is one main, and major issue I had with this crossmember. This was purchased for my wife's B16 swapped CRX, since the header was incompatible with an unmodified stock crossmember. It's made very well, bolts up exactly where it should, but it hangs LOW. So low that backing out of the garage and onto the gravel driveway pretty badly scraped the bottom. It also caused problems when loading the car onto a trailer. Her car is lowered, but only 1.5-2 inches. Not slammed by any means. The bottom of this crossmember cleared the bottom of the stock bumper by more than 2".
We ended up removing it and modifying the stock crossmember to drive the car. It was low enough a single pothole may have been enough to damage the frame of the car if hit just right.
Otherwise for a dedicated race car or a CRX at stock ride height maybe it will work well. The other reviewer said that the mount location isn't close enough for the trans mount to line up. That's because it's not made for any stock trans mount, it's an optional mount for an Innovative product.