Picture 1 of 1
Stock photo
Picture 1 of 1
Stock photo
Tjernlund Products AD-1 Auto Draft Stove Blower Model - Black
E Bargains r us (937)
100% positive feedback
Price:
$184.99
Returns:
30 days returns. Buyer pays for return shipping. If you use an eBay shipping label, it will be deducted from your refund amount.
Condition:
Depending upon the type of wood burned, the fan must be removed from the vent pipe and cleaned at least once per year, soot and creosote buildup must be removed from both the fan wheel and housing. Auto-Draft may be mounted on horizontal, vertical or inclined vent pipes.
- Buy It NowAuto-Draft 7 in. x 9.5 in. x 9 in. Stove Pipe Draft Inducer with Speed Control
Oops! Looks like we're having trouble connecting to our server.
Refresh your browser window to try again.
About this product
Product Identifiers
BrandTjernlund Products
MPNAD1136407, 9792
UPC0080956360014
ModelTjernlund Products AD-1
eBay Product ID (ePID)1900577769
Product Key Features
Suitable ForIndoor
ConstructionSingle Wall
ColorBlack
Item Depth7 in
Number in Pack1
StyleTraditional
MaterialStainless Steel
TypeBarrel Stove Kit
Dimensions
Item Height9.5 in
Item Width9 in
Item Diameter9.5 in
Additional Product Features
Items IncludedStand
All listings for this product
Ratings and Reviews
Most relevant reviews
- Dec 05, 2016
Simple Installation - Works Great
Saw some reviews elsewhere complaining about the instructions. The package included a stick-on template to drill and cut necessary holes. All necessary instructions appeared to be printed directly on the template. I used a high speed metal cutting disc to cut the square hole, and detailed the top edge exactly as drawn on the template. The supplied hardware may have been adequate but I substituted larger / heavier clips and used some No.10 pointed screws to make the attachment easier. My stove pipe was heavy gauge proper stove pipe, so there was no need for additional holes or hardware to get a good seal with the provided gasket material on the two side flanges. I did use some high temp stove cement to seal the top and bottom edges. This fan instantly solved my problem of slight blow-back when opening doors to add logs. It also makes starting a new fire heat up much faster. Once the fire is established I can either leave the fan on low or shut ir completely off. I thought there might be some leakage around the fan shaft. It appears to be a large hole, but smoke goes right up the stack with no apparent desire to come out that hole. Excellent product, does exactly what they said it would do.Verified purchase: YesCondition: New
- Nov 28, 2016
Helps start fires.
Occasionally during outside mid temp weather or low barometric pressure, my add on furnace would be slow to start or hard to get heat out of. Occasionally it would also smoke out of the door when checking fire or adding wood. On the furnace jacket I mounted and wired a switched outlet to plug this into, easily reachable from front of furnace. When the chimney draft meter shows low draft, 2 or lower, I switch it on with the variable speed left at half way up on the dial. Seldom do I leave it run all the time but I can get a fire going, turn it off and walk away often in half the normal time it used to take. The motor does get hot running at any speed, not from flue heat. It also leaked smoke at the curved housing joint that was hard to see without a flashlight. I sealed it with black high temp silicone gasket sealant, that is hard to see after applying. It does seem a bit loud but the sound is covered over when furnace blower comes on. The smoking and warm, hot motor kept me from giving it 5 stars.Verified purchase: YesCondition: New
- Nov 14, 2017
DANGER DANGER
Template to cut out makes the hole toooooo big. the instructions don't say anything about half the items in the box. there's no power cord with it and they don't tell you that until it gets to you and you have to supply that. there is no bottom mount and the top mount plate it flat not round like the pipe it goes on so you have to bend it to make it work but since the hole they have you cut first being toooooooo big what do you do, well I sealed it up with exhaust tape but not sure how that will work out but time will tell. the idea is good but a very poor design.Verified purchase: YesCondition: New
- Apr 10, 2018
Solved the smoke problem
This blower solved our smokey stove problem. Even on the lowest speed, it provides plenty of draft for a nice burning fire with all the smoke exiting through to the outside. Runs with moderate noise which is ok for the shop we're using it in, but perhaps not ideal for living areas.Verified purchase: YesCondition: New
- Dec 10, 2024
good quality. does the job. holes on te...
good quality. does the job. holes on template don't match blower, but no big deal.Verified purchase: YesCondition: New
- Jan 25, 2017
Worked well
Verified purchase: YesCondition: New
- Oct 19, 2016
Recommended
Highly recommend this product. It works greatVerified purchase: YesCondition: New
