About
Reviews (74)
Jan 07, 2017
When a solder sucker will not do
1 of 1 found this helpful Good day,
For those applications where a solder sucker is too big or too strong, you may be removing parts that would be sucked inside and ruined or maybe the tip cannot get in there, especially on dual sided. Lay this down and boom, done. A lot easier than fluxing a piece of copper wire/braid.
Thank you for your time.
Sep 08, 2016
Love these
Good day,
Full extension on this one is 11", that is to say a straight line, not an 11" bar. This if fine for people About 6', I used to have two connected to get to my height.
IMPORTANT FACT: If you move these from high to low often you WILL wear out the washers quickly. Years ago the Manufacturer would give you one set of washers when that happened, after that you were on your own. So if you will be moving this up and down (say for people of differing heights) I suggest opening it up when you get it and trying to get spare washers before they are worn JIC. They were hard to find in the 1990/2000 era, when you found them you bought the box (remember I had two on each shower). The rest is long lasting if you do not abuse it. Never over tighten the adjusters. Use a separate hanger for any hose attachments as the weight will pull the bar down constantly causing you to need to lift it back in place thus, WEARING IT OUT.
Thank you for your time.
Jul 19, 2016
Works, great price.
I got two of these, Blk & Red for the two ports. Being a beginner scratching on my forearm over an old hand poked tattoo, I know they work. I tried to use an RCA, but they are not as flexible when you turn, even I know these are better.
Got a great price. Building a setup a few parts at a time, getting good deals is important. This works and seems a fair quality.