About
All feedback (203)
- alexderek1234 (205)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- az_warehouse (18281)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- promacsparts (397)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- bburkeelectronics (4141)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dn-printers (9509)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseAwesome buyer, prompt payment, valued customer, highly recommended.
Reviews (3)
Jan 03, 2017
was a bad fuser from the start
Installed in the machine. Jammed every copy out of every tray. Re installed old fuser no jams of any kind. Tried new fuser again. Jammed out of every paper source at the fuser. Again, re installed the old fuser and it works fine.
This fuser was bad from the start.
Jan 22, 2019
Will use again, and refer to others No Problems at all.
Is everything as advertised plus much more.
Nov 15, 2021
Machine with a bit of tuning and TLC is very good.
1 of 1 found this helpful The machine covers all had to be replaced as the one's on the machine were badly discolored, however, I had the covers so it became a mute issue.
On the upside, the machine had not been run for what appeared to be several years, thus al the firmware, and memories had to be re programed though that is fine as I know how to do this. Once that and the covers were taken care of The tires (feed/seperation etc,), were really bad, though I had those and that then became another mute point. We did install duplex on the machine and it worked just fine, OVERALL All BECAUSE : I had all the pieces, parts, and knowledge the machine ran excellent, It is currently running Duplex, 2500, to 3000 invoices per day and never missing a beat. It was a good machine,, and is, I think it was a red headed step child that someone put away and just recently brought it out and didn't have the market for it. The machine had fairly low copy count and the M/A kit had some distance left in it and I reset the counters when I re programmed the equipment and it is doing very well, I did have to replace the transfer roller which I had a new one and copy quality was prestine at that point. A Good Machine, paid a little more than I normally do for those machine but the core machine was worth it and is proving out extremely well, I did replace the toner cartridge with a brand new extra large as the one that came with the machine the drum was really not all that good no big deal on any of the issues of the machine.