Transaction was really great and shipping was lightning fast! I felt his description was pretty accurate but he went above and beyond as a stand up seller giving me an additional credit (cash inside) because he felt the condition when packaging it for shipping was a little less than originally described. Amazing person to deal with!! Not only was the manual exactly what I needed and a great value in itself, but I value Ken as a great stand up guy which is rare in this world today!!
Thank you
Reply from: black_hills_ken- Feedback replied by seller black_hills_ken.- Feedback replied by seller black_hills_ken.
Thanks for the kind words! Pleasure dealing with you!
USA Gear Camera Case for Panasonic LUMIX w/ Strap , Ripstop Nylon , & Pockets
May 21, 2019
Perfect for my gear
Nice case for my Lumix FZ300. The camera fits in with the sunshade toward the bottom. Room for my Z base next to it. Spare battery, SD card in one side pocket, two cables in the other side pocket. Battery charger in the front zipper pocket.
No room for my BlackRapid camera shoulder strap, so I fold that & stick it under the case handle.
The camera case has a comfortable padded handle as well as a shoulder strap.
New Electrolux Canister Vacuum Cleaner Motor # 6500-293 Fits 2000, 2100, 6500SR
Dec 28, 2016
Good replacement motor
Original motor was noisy and suction had deteriorated. The vacuum is back to new performance with this new motor.
Not difficult to install.
These take more time to assemble than genuine Harley parts
Be prepared to work harder to make these sliders replace your stock ones. You'll need the use of a heat gun to assemble. We had to heat the original chrome caps that cover the top of the sliders. These sliders measure wider at the top (probably due to the manufacturer not accounting for the chrome thickness) so the caps didn't go on without heat first.
Next was the problem of the axle not slipping into the right side slider without wedging a flat screwdriver into the split of the slider, slightly tapering the edge of the axle that enters the hole, and having to use a hammer to fully make the axle go through the right side.
If you're doing this as a billable job, add an extra hour of labor ahead of time.