About
All feedback (107)
- asianautos (40093)- Feedback left by buyer.Past monthVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- allstateus (909794)- Feedback left by buyer.Past monthVerified purchaseThanks for buying a SquareTrade warranty. Call 877-WARRANTY if you need help!
- ecomelectronics (449714)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- dheader (155544)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, Thanks for buying from dheader
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- yoyocheckout (15852)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
Reviews (2)
Mar 12, 2017
For the intermediate and professional
Anyone can use this epoxy resin, its the setup and pour that can be complicated. I made a bathroom vanity top for a new sink and I didn't want to pay $700+ for a vanity and sink 60". I made a stackable spruce slat top 1"x.75 " and used a biscuit cutter to glue the stack together 24"x60" . Once that project was completed it was stapled and glued to a backer plywood board for stability. I sanded the top down to a fine smooth look. I then used sealed any areas that had gaps with plastic wood putty. Resanded then sealed with 3 coats of a natural stain and poly to seal per instructions. The hard part was to take two 1/2 gallons of the epoxy resin and hardner to make one gallon, then divide it by 3 for three seperate pours to make sure I was doing it right. Thats where time, a clean room and leveling is critical. Making a longer story abit shorter is that all three pours went perfect, it was the fact that tiny dust particles does cause a dimple. if you get them in time, then it will self level but also make sure your product is mixed well and that its at room or just above room temp, just to help the flow. Make sure you have 4-10 hours of wait time available if you plan to do more than one pour. After 10 hours, you have to prep the hardened epoxy with 220 grit paper to prep another pour. Too much work than just beiong ready to do a pour within the 4 to 10 hour mark. Its alos important to know that I had cut my hole where the sink would be. I had alot of leakage of good material through my cardboard I used as a backer around the sink hole. Good luck to you, take your time and read the instructions and you wont fail.
Jun 18, 2018
Best Basket Ever
This Strainer is a big upgrade from the one we had. We had a little issue treading the new one on as the pump drain plug was in the way, so I had to mount it sideways then mount the pump sidways so that the strainer is vertical. But the nice new features are a big clear dome which you can see the whole strainer inside and the strainer basket cover the entire basket area giving me about 100% filtering room. This is the third basket and by far the best