About
All feedback (932)
- mxpowerplay (64748)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you. A pleasure to do business with.
- ccairon (1779)- Feedback left by buyer.Past 6 monthsVerified purchaseA+
- jiangyo68 (1200)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- chaparralmotosports (274295)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!! A++++
- stevbmi (82025)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- the-d-zone (35555)- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
Reviews (15)

Jul 31, 2017
Clone tested perfectly!
Read and watched reviews of this clone charger after purchasing. I performed testing on NIMH and LIPO cells, all voltage and current measurements stated by the charger were very accurate to my fluke 87. This particular clone is good and I do recommend it!

Mar 03, 2018
Purpose unknown during testing
Performed multiple tests on the charging of a 18650 battery. The battery charged okay except slight over charging to 4.22V but when hooked to a load on the out terminals the batterys voltage did not come out until the battery was at 3.8V and the load stayed on all the way to 1V. Not sure about the purpose of this module.

Jul 24, 2018
Great took you never thought you needed
I have been rebuilding cylinder heads on 4 stroke dirt bikes for about 4 years now and I have always struggled with installing valve steam seals. I used to size up the seals with a quarter inch drive deep socket and turn the head upside down to install the seals on the guides. With these you can load all 4 seals on the took at once and just align/ push the seals right on one at a time! Awesome tool!