About
All feedback (990)
- tyllq (124496)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dgkunkungy08 (2442)- Feedback left by buyer.Past monthVerified purchaseHope to deal with you again. Thank you.
- shr_traders (805)- Feedback left by buyer.Past monthVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- straygrape (31)- Feedback left by buyer.Past monthVerified purchaseFast payment, great communications, fast and friendly emails
- detroitaxle (1023832)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- chuanxin_autoparts (6330)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
Reviews (12)
Oct 23, 2019
Easiest alternator rebuild I have ever experienced.
Very easy install, simply remove the screws off the back of the alternator case, and unless you are replacing the bearings, ignore the screws on the side of the case. Remove the aluminum cap off the back of the alternator, and the regulator and brushes are sitting right there, held down by a few screws.
For me, only the brushes were bad, causing lights to flicker all over the car, however I installed both the regulator and brushes. I simply kept the new bearings for one day the old ones fail.
May 07, 2017
Looks good, fits, but throws CEL
These knock sensors do not work on 1998 Honda Accords, and so far, everyone still needs to go with an OEM sensor. I personally tried it on my Accord, and it worked for a while, until I reached a speed above 30MPH. Although, this sensor may still work on other models. I spoke to two mechanics so far, and they all agree that currently only name brand HONDA knock sensors work (which is a shame, as these sensors are much cheaper, and actually look higher quality).
May 18, 2016
Affordable, but a few notes on quality
For the most part, this is a good printer if you are good at building things. I had to dock a star due to the poor quality in a few of the components. All issues were easy to resolve, and the seller was very helpful in communication.
The Good:
1. Very high quality prints, very accurate, and the test file prints right away without too many adjustments. There really is no need for "fine tuning" in Cura, it pretty much prints nice and clean with stock default settings.
2. Overall, the quality of the components is acceptable, and in some cases excellent. The Z-axis screw shafts are very smooth and accurate, while the brass threaded bushing allows for very smooth and precise movements. The X-axis belt mounts were only acceptable in quality, but new mounts can be 3D printed with a simple download off the Internet.
3. The power supply is powerful enough out of the box to print PLA with the extruder at 210 and the heatbed at 60. Although, to print ABS some insulation may need to be installed. Knowing that PLA was the recommended material for this machine, I will not dock a star, as I knew I would have to push the limits to print ABS anyways.
The bad:
1. The 100k thermistor was bad in the heat-bed upon arrival, and the extruder thermistor failed soon after. Although, both were very easy to replace, and to diagnose. I simply had to use a digital multi-meeter, and checked for conductivity. Specifically it was the wire leads from the thermistors that broke, and it appears to be due to poor metal quality.
2. The linear ball bearings came with some metal fragments within the bearing, and never did run very smoothly. Some of the linear rails were also of questionable quality, as they were not completely smooth, and had some machine 'marks.' Overall, this did NOT affect the accuracy of the prints in any way, and after the bearings were replaced, there was no difference in print quality. Therefore, I did not dock a star for this issue, as you get what you pay for.
Finally, this is the best printer in it's price range, and the seller was quick to respond, and very helpful. If you are looking for a low-cost printer, and don't mind it's few flaws, and fixing a few things, I do recommend this printer. Although the printer did not come with instructions, the seller does provide tutorials on youTube, which are amazingly useful. I recommend asking the seller where he posted these videos, and follow the instructions closely.
Hope this review helps others out there!