About
All feedback (1,255)
- ken5314morris (18963)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- ultimatecareparts (180416)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- e.trader.24.7 (40345)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- rainbow-andy77 (81609)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- rallyprepservices (42921)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- elizabpow-84 (4549)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (56)
Dec 25, 2024
Austin 7 replacement core plugs
Re-coring the block and head plugs on my 1933 Austin 7 tourer.
Bought these (and a second set) for the job.
Probably the hardest part of the job is getting to the two larger plugs. ome say you have to
take the engine out to get to the rear, but if you bore a 2.5 to 3 inch hole in the bulkhead for the rear one then you can get to it without removing the engine. Front on needs a lot of dismantling and preferably the radiator removed.
Small ones on the head are easy.
Do not forget to give the voids a good clean, not only to remove and swarf while taking the old plugs out, but to get rid of as much rust as you can while you can get to it.
Would recomment the core plugs probiding you feel proficient to do the job yourself.
Sep 16, 2023
Full rear brake re-build on Fiat Ducato X250
Done a complete re-build on my FIAT Ducato 2007 X250.
Discs, pads, calipers, handbrake cables, and brake shoes.
Fitting new pads is definately not for the faint hearted as a lot of dissassembly has to be done to get to them.
Fitting is pretty easy, but I do recommend taking pictures of the assembly as it can be a head scratcher when coming to put back together.
The shoes them selves are good quality and once adjusted correctly do the job they are supposed to do. Hopefully they will last as long as the last set.
Oct 03, 2024
Switch cleaner lubricator
Always a useful item when you have noisy potentiometers or switches.
Used it on nearlyevery pot/switch on an oldYaesu FT-757 I am renovating, and worked well on all the pots, especially the volume which gets the most use.
Will buy again when the present cans run out.