About
All feedback (507)
- *best-deals* (1898)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- grosshandel-4-all (2830)- Feedback left by buyer.More than a year agoVerified purchaseSeriöser Käufer, prompte Bezahlung, geschätzter Kunde, vorbehaltlos zu empfehlen
- *****- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
- the-game-monkey (261289)- Feedback left by buyer.More than a year agoVerified purchaseMany Thanks! :)
Reviews (3)
Oct 30, 2019
Not convinced.
1 of 1 found this helpful Used this on a couple of batteries, one that was on my bike, that would not start. Fitted a new battery, and it’s started every time since.
Tester tells me that the old battery is fine, I have my doubts as you have to select CCA before you test.
I put an ammeter on the test leads, it barely moved during the test procedure, how can it measure CCA without drawing current.
Sep 13, 2019
How to remove the drawers! My way!
1 of 1 found this helpful One of my drawers appeared to have something trapped behind it so it would not close properly or safely locked.
Nothing on the internet gave me a clue, and I had long since lost the assembly instructions.
Looking closely there was an oval hole in the draw runner, when the drawer was not fully open you could see a spring tab, but how to depress if then the drawer was fully open and it was hidden by the rest of the runner?
My trick was to take a strip stainless steel that comes from a windscreen wiper blade about 3mm wide and 0.3mm thick.
With the drawer not fully open, and the spring tab clearly visible I inserted the strip into the oval hole from behind until it appeared near the drawer front.
Then by simply opening the drawer, the spring tab was compressed by the strip, so it passed easily underneath the dimple in the runner that would normally stop the drawer from opening.
Repeat on the other side, and the drawer slides easily free of the runners.
I hope this helps someone else.
Jan 07, 2020
Do not rely on this for security.
Anything but heavy duty, it’s essentially made from thin sheet steel.
Arrived with three keys but one was severely bent.