About
All feedback (61)
- 7720matt (2145)- Feedback left by buyer.Past 6 monthsVerified purchaseSo Glad you liked the record. My younger brother bought it when it was new. Then my cousin wrote her name on it. Thanks.
- indiana*jon (4426)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- allanb (3470)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- southtennesseeauction (1965)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks So Much Enjoy🫠
- tropical_flipper (458)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- geneseevinyl (1676)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for your purchase! Excellent buyer.
Reviews (3)
Sep 04, 2018
Exact replacement
These are an exact replacement for power supplies used in the cable boxes in my apartments.
Mar 22, 2017
dryer timer M400G
I used this timer to replace the one on a large battery charger. It works fine. I believe it is about 80 minutes per side. By side I mean there are two identical off/on positions each 180 degrees apart. I put my input on the center terminal and my load on the "A" terminal which has a small dead zone near the off position. The lower terminal is first on and last off, it runs the timer motor, I also put my cooling fan on the lower terminal so the cooling fan runs for a bit (maybe a minute or so, I didn't time it) after the transformer cuts out. On a dryer it allows the drum to turn with the fan on and the heat off to cool the clothes down instead of shutting the dryer down hot. I removed one of the neutral terminals and riveted a larger terminal bus in its place because I needed additional neutral connections. I could have done the same thing other ways, but what the heck, it looks better.
Dec 06, 2024
Very heavy and well packaged for shippment.
The packaging was excellent, and it needs to be. This thing is a beast. It is very heavy and was packaged in a very heavy cardboard box with a plywood bottom. The box was reinforced with 2 additional layers of very heavy cardboard. My hat's off to the person who packaged this thing.
There are few things that I need a jack this heavy for, combines, CNC machines, loaded semi trailers, etc.... I used it to correct the bend in 2 bent "C" springs on a kidney bean lifter. It was scary due to the forces involved, but the jack had no trouble bending the spring. It did, however, twist in the bottle. This was totally my fault as the jack was never intended to support a twisting load. I was able to restore it, by reversing the setup...the jack is fine. I'll use a different setup next time. Those springs are $300+ a pop, and completely useless as they were; so the jack has paid for itself already. I won't be reaching for it to lift the deck on my lawn mower, but I'm all set for the big stuff.