About
All feedback (493)
- ialotl (204)- Feedback left by buyer.Past monthVerified purchaseExcellent! Great Customer. Hope to see you again soon.
- irvinelectronicsalvage (6908)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for shopping Irvin Electronic Salvage!
- kc.dak (28409)- Feedback left by buyer.Past 6 monthsVerified purchaseThank You! Please communicate any issues directly using ebay's messaging system
- mrsreporon (42194)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- mespremierspas (5603)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. A pleasure to do business with.
- area541 (2876)- Feedback left by buyer.More than a year agoVerified purchaseGreat communication. Fast Payment. Excellent eBay buyer! Thank you from Area 541
Reviews (12)
May 23, 2017
Does the Job
Use a lot of their products and about 10 gallons of the Max Bond. Have been using on my aluminum boat to seal the bilge and to seal the deck after sandblasting corrosion off. You MUST use the LV if you are glassing a large area. The MV is so thick that getting rid of the bubbles is VERY time consuming. With the LV, it is MUCH more manageable and similar to West system viscosity. In smaller laminations, the MV can be made to work. Best if you wet the surface pretty well first and then squeegee up through the glass. Resin on the top of the glass over a drier substrate creates lots of bubbles. Note that it has a very amber color and is NOT clear. However, if you mix it with the white colorant, it makes a very durable and glossy bilge coating that is very white. Also, you can make up your own "putty" with cabosil, marble dust, milled glass fiber and even chopped fiber for holes and fillets. Very versatile. Let you know in a few years how it holds up. Sands ok once it goes off hard. Otherwise sticky. Can shape with a surform if you get on it before it fully cures and can save a lot of sanding time.
Aug 02, 2021
Big Diameter, No Keyway :(
Pro - Nicely made and nice finish.
Good price.
Cons - Very large diameter - very low rpm ratio unless you have a HUGE crank pulley (we are talking 9-10" just to get 2.2 to 1!; Alternator RPM should hit 5k and diesel rarely goes above 2100 rpm. Hmm.
slightly large hole, not too tight on a 7/8" shaft, probably .001-2 too big;
Big Con: NO Keyway! Have to broach one, and in doing so, will mess up the finish.
Jul 05, 2017
Good quality
Very heavy duty and well made. Highly recommend it, if it is what you need. Got several sizes and all were well made.