About
All feedback (6)
- pickyourperfume (127566)- Feedback left by buyer.More than a year agoVerified purchaseHope to deal with you again. Thank you.
Reviews (1)
Apr 05, 2019
SPARE KEY FOBS
1 of 1 found this helpful I bought these to have spares for our camper that is built on a 2017 Ford E-450 chassis with keyless entry.
I thought I ordered 2 fobs but I received 4 fobs so it appears I misread the description.
The product description did not include the E-450 but the photo and frequency numbers were the same as my factory key fobs.
CR2025 batteries were already installed.
The Ford owners manual for programming the key fobs did not show the correct instructions and I did not receive instructions with my order.
The fobs I received did not have the i.d. numbers on the back like the factory fobs do.
An internet search brought up the following 2012 instructions with which I successfully programmed my new and reprogrammed my 2017 factory fobs.
Procedure A:
1.Close all doors, then open drivers door and press the Unlock button on driver’s door while it is open, insert key into ignition.
2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1)
(Off is the position where you can remove your key, RUN is the position just shy of starting your vehicle.)
3.Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5.
4.Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4. for all other remotes.
5.Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.
*If this does not work try the procedure with the door closed.
If that does not work, search for alternate programming instructions.