leo_on_lion on eBay

About

Location: United StatesMember since: Aug 25, 1999

Feedback ratings

Last 12 months

Positive9- positive feedback in last 12 months

Neutral0- neutral feedback in last 12 months

Negative0- negative feedback in last 12 months

All feedback (373)

jdmxpert (23937)- Feedback left by buyer.
Past 6 months
Verified purchase
Quick response and fast payment. Perfect! THANKS!!
batterysharks* (42936)- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
treasurepeek (69638)- Feedback left by buyer.
Past 6 months
Verified purchase
Excellent customer! Thank you for your business!! A++++++++++++
isaalieberma-0 (241)- Feedback left by buyer.
Past 6 months
Verified purchase
Thank you for an easy, pleasant transaction. Excellent buyer. A++++++.
fairymall06 (22330)- Feedback left by buyer.
More than a year ago
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.
*****- Feedback left by buyer.
Past 6 months
Verified purchase
Good buyer, prompt payment, valued customer, highly recommended.

See all feedback

Reviews (8)

Klein Tools 11063W 8-22 AWG Katapult Wire Stripper NEW W/O BOX

Jan 16, 2017

Well-made. Still Not-Quite what I was hoping.

I already bought a "flat-blade/universal" version of this tool in the Gardner-Bender/GB variety. It made two strips on standard solid-core 12-ga wire with the extra plastic coating before, apparently, loosening up and failing to do any more clean strips. The complete picture is that the environment was around 20F so the insulation(s) were a little stiffer than in, say, July. This tool otoh has separately sized holes for each gauge, but again, temperature seems to matter. It works fine to strip 12-ga on the 12-ga hole if the wire is warm enough, but has trouble if it's cold. I then drop down to the 14-ga hole to start it and back to the 12-ga to finish. I'd LOVE to have a Special Single-Gauge Version of this tool, Dedicated--and Optimized in terms of Forces Needed--to JUST 12-ga. Solid, but I think it's going to take that to get a 5* rating.

NEW Arduino compatible UNO R3 ATMEGA328P CH340G Board + USB Cable + wires

Mar 07, 2018

I'm loving it. Had an unfounded concern about the USB interface chip but works fine.

Already using it as the basis of a 3D scanner based on an IR laser diode. (The resolution of the VL6180 sensor leaves a LOT to be desired, but the Arduinoid UNO R3 is as good as any.) I was concerned about the USB protocol being provided by an ic different than the one on the original, but what's there works just fine. I bought a wall wart which does seem to power it up, but possibly not enough to run the LCD daughterboard properly. Works fine with the USB power, and I'll keep trying other DC power sources.

Portable External DVD Drive USB3.0 DVD RW CD Writer Drive Burner Reader Player

Aug 18, 2018

"Lightweight. And works fine out-of-the-box."

Meets all my expectations. The cord is too short to be useful on a desktop with backside-only USB ports, so be sure to get an extender. I'm sure the target was notebook computers with no built-in DVD drives. Very happy with the little fellow.

1 of 1 found this helpful

See all reviews