About
All feedback (462)
- sylvestersmercantile (15035)- Feedback left by buyer.Past 6 monthsVerified purchaseExpect no better! A top notch ebayer A++++++++ Thank you!
- ironponydirect (80637)- Feedback left by buyer.More than a year agoVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- well-well-model-store- Feedback left by buyer.More than a year agoVerified purchaseNice Buyer ! Thank you for your support. Look forward to your next visit.
- salvagedcycleparts (47637)- Feedback left by buyer.More than a year agoVerified purchaseWE HIGHLY VALUE YOUR BUSINESS. BIG THANKS FROM SALVAGEDCYCLEPARTS
- gomsermotorparts (21710)- Feedback left by buyer.More than a year agoVerified purchase.
Reviews (6)
Jun 13, 2017
PDB For drone builds
We use this on all the big drones we build, 550 and up. It is required when you use 5 volt cameras or transmitters. It is also more convenient to attach your ESCs to this than to bundle everything together. If you use a Naza, it has a couple of terminals to attach the Naza power block to. I like these over the mini sized boards because of the XT60 connector.
Aug 28, 2009
Brand new retail box E5300
I got this processor for $58 shipping included. The vid came up as 1.26v which is high for these Wolfdales. I did a clean Vista 32 install at stock speeds and then tried some basic overclocking. I added .04v to the core voltage for a total of 1.3v, set the FSB to 266 / 1066 (3.5 GHz)and let 'er rip. Fired right up and ran an 80% cpu utilization burn in in SISoft Sandra for an hour with no hicups. CPUz showed the core running on 1.28v. I was using a copper core Intel box cooler (Q6600)with the fan set on 100% in the bios. With a Xigmatek 1283 you could run this all day at 4.0 GHz. This is a great deal on a cheap gaming processor. Put a BA video card with this and frag away!
Aug 16, 2017
These work great with 8 x 6 3 blade props
I used these on a quad copter build with AirMaster 8 x 6 3 blade props and the combination is excellent. This quad has a PixHawk FC and uses a 3S 5000mAh 35c battery. With 20 amp ESCs this thing just sips on the battery. Flew it for 20 minutes as a camera platform on a 640mm quad chassis and had plenty of battery life remaining. The prop hubs are actually 4.89mm so be aware that drilling out a 3mm hub adapter to fit the prop hub is required for a good fit.