About
All feedback (62)
- hth-tech (2965)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- dorissmelcer2008 (10238)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- jiawen2018 (49203)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- *****- Feedback left by buyer.More than a year agoVerified purchaseGreat transaction. Excellent buyer. Good communication. Thanks!
- remachines (9258)- Feedback left by buyer.More than a year agoVerified purchaseQuick Payment, Good eBayer! A+ Thanks again, REMACHINES
Reviews (3)
Nov 03, 2021
Just what I needed
Exactly what I was looking for, worked perfectly
Jul 16, 2022
Solid metal faceplate, They don't make them like that anymore
Exactly what I was looking for, looked like it came new out of the box complete with keys
May 27, 2023
If you need it, you need it
It works exactly as I needed it to, includes a support bar for the riser.
2 Things to note:
1. It does not use screws for each slot, rather a mounting plate with a screw at the end that pins down the card in the slot. Works great but just an FYI in case you are using some unusually cards or accessories that might require screws, in that case you would either have to modify it or it won't work as there is no screw holes on that side. Also keep in mind that if you are using a 2U or similar power supply, the spacing will not leave much overhead for screws, or any power or other connectors the card may need depending on where they are located, I got around this using a 1U power supply but it is something to be aware of in the placement.
2. The support arm has screw holes for standard fixed risers using slot 6 but if you are using an ITX or motherboard where you want to use slot 7, using a flexible riser 5cm with angled connector will work but the holes will not line up to mount it on the arm, you can either use it without the arm, strap the riser to the arm with zip ties and spacers or drill holes in the location you need. I tried the two later solutions and both worked for me. It includes 2 spacers/standoffs to mount the riser on the support bracket and screws. It is a single screw to remove the bracket if you want to go without it.
The 3 slots sit high in a 2U frame so expect no significant clearance on the backside of the top slot but extra room for airflow below the bottom slot, works well for my use but some cards use a extra space on the back and though it may work with a flat plate, like some GPU's have, anything that extends out a significant distance on the backside of the card will either have to go in a lower slot or won't fit.