About
All feedback (1,047)
- tacfunusa (26671)- Feedback left by buyer.Past 6 monthsVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- thelittledeals* (71027)- Feedback left by buyer.Past 6 monthsVerified purchaseGreat communication. A pleasure to do business with.
- *****- Feedback left by buyer.Past 6 monthsVerified purchaseQuick response and fast payment. Perfect! THANKS!!
- gkgoodcheapparts (2391)- Feedback left by buyer.Past 6 monthsVerified purchasePrompt payment, pleasure to do business, A+++ buyer
- mimscyclesalvage (2473)- Feedback left by buyer.Past 6 monthsVerified purchaseHope to deal with you again. Thank you.
- *****- Feedback left by buyer.Past yearVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (17)
Feb 23, 2022
A little hard to mount
If you mount this under the dash, which I think most people do, you will have problems with inserting one of the side screws, if you go all the way to one side or the other. On my truck, anywhere but to the far right side, would have been a obstruction to getting in and out of the truck. I did manage with a small ratcheting box end wrench. If the manufacture had included two holes in the large bracket, that lined up with dash mount holes, you could install the side screws first and then go through the bottom of the large bracket to the dash screw holes.
Aug 20, 2022
Fit my Alpha 1 Gen 2
Please be aware that this bearing is the greaseable type, so be sure line the inlet hole on the bearing with the outlet hole in the bellhousing. After fully seating the bearing, pump several of grease through the zerk fitting to make sure the grease is flowing into the bearing. I used a sharpie to mark the outside of the bearing and the outside of the bellhousing. Take your time with this, as once the bearing is installed, it is NOT reusable. On a side note, do NOT use aftermarket bellows, unless you enjoy doing this every 2 years.
Dec 22, 2017
Could be better
Not as bright as I thought it would be. The 8 hour shutoff feature is very annoying. I have to go out every night and turn it back on. It should have had a photo optic light sensor option. I have only had it for a couple of weeks, so I don't know how long it will last.