About
All feedback (383)
- epathstore (24460)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- maystar2022 (5948)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- goodplace2shop (478017)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- xsotica (15072)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- outdoorbunker (332868)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- reseller4fun (4800)- Feedback left by buyer.Past monthVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
Reviews (3)

May 11, 2020
Absolute night and day difference! HIGHLY recommended!
2 of 2 found this helpful Took a little fiddling, but this $60 DSP made my 10-yr old Infinity Reference 12s come ALIVE!
2007 Ford Crown Victoria P71 Interceptor, JVC double-din head unit, hybrid front 5.25" component set, Rockford Prime rear component set (wouldn't recommend aside from easy install), DB Drive 1050 monoblock, 3 Infinity DVC 12s in a 2.6ohm loop.
Setup; I set sweep about 15% up (30-35hz), wide set about 1/3, amp gain maxed, amp bass boost all the way down, amp crossover set open (max), subsonic filter set open (minimum), bass boosts/effects on head unit off, and head unit equalizer set to flat at 60hz and -3 (of +/-9).
To "bypass" this DSP's subsonic filter, turn the right dial all the way down/counterclockwise and leave it pressed in. From there, the left, bass control knob lets me easily adjust the bass up to and back from distortion.
With three 10+yr old 12s, it's now loud enough to make my ears ring when I get out. And my hearing isn't the best by far! I highly recommend this over the $25-40 ones on the market for it's adjustable preamp voltage setting and dual grounding alone.

Aug 26, 2020
Fantastic results on my first time bluing anything!
Pics are before and after on 1095 cro van.
This stuff works ridiculously well! I used it as a final finish on a used and abused short Ka-Bar I reconditioned. My main advice is FOLLOW THE DIRECTIONS!
The first coat goes on full strength; keep it moving, I found about 30-60 seconds worked well.
MOST IMPORTANTLY- take your time with the darkening coats and absolutely dampen the applicator. I tried to accelerate the process and put it on full strength again. Come to find out, at full strength, it just pulls it back down to the original shade. It needs the water to (I assume) dilute it a bit and allow additional layers to build and, therefore, darken the color. As soon as you oil it the color really pops! I already have more uses in mind after using it.

Jun 05, 2024
I've tried (mostly) them all and this stuff is THE best at "everything-proof-ing' leather that I've found. The entire line of Bickmore products are re
I've tried (mostly) them all and this stuff is THE best at "everything-proof-ing' leather that I've found. The entire line of Bickmore products are really hard to beat.
A+ seller! They had a personal emergency, but made everything right as soon as it had past; I'm too human and flawed myself to bash somebody over something beyond their control.