About
Reviews (6)
Feb 24, 2016
Brittle, use in a drill press
I used these for enlarging holes in a fiberglass printed circuit board (#61 and larger). The smaller drill bits need to be used in a drill press with very gentle pressure applied or else they may buckle and bend. They might be okay in a Dremel tool with a very steady hand. I really can't complain - the price was right, about $5 including shipping and I received the bits within a few days.
Nov 10, 2017
Accurately described
OEM, as described. Functioned perfectly.
Aug 26, 2016
Not a Bosal, but still good
Item delivered was actually an AP International 2100-72764-4, made in the Philippines, but appears well made and the shape and bends were the same as the OEM pipe it replaced. The bolts holes lined up perfectly with the rest of the exhaust system. For the problem (as noted by another reviewer) of the hanger rods being slightly bigger than the OEM, I found that liberal use of silicone spray lubricant (don't use WD-40 or a petroleum-based lubricant) made the rubber "donuts" slip on easily. The only significant issue was that the hanger rods were slightly out of alignment but the rubber donuts could be stretched a bit to fit. Overall, the pipe works fine and is a good value especially with shipping included.