About
All feedback (393)
- shoeco.shoes (4948)- Feedback left by buyer.Past 6 monthsVerified purchaseThanks for shopping with ShoeCo.Shoes
- mcard10071 (7995)- Feedback left by buyer.Past 6 monthsVerified purchaseThank you for an easy, pleasant transaction. Excellent buyer. A++++++.
- starcen768 (68)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- donlgray (25278)- Feedback left by buyer.Past yearVerified purchaseA+++++ great person to deal with. thanks again!
- second.sale (4072841)- Feedback left by buyer.More than a year agoVerified purchaseGood buyer, prompt payment, valued customer, highly recommended.
- legends-distribution (226243)- Feedback left by buyer.Past yearVerified purchase:*'""*:•.Smooth fast transaction. Highly recommend this Buyer •:*'""*:•
Reviews (20)
Jul 17, 2019
Strong, Stable, and Easy to Use
Works great to raise the front of my 1993 Honda Nighthawk 750. I don't have a center stand but do have a lift for the rear of the bike. I used the rear lift to stabilize the bike and then used this front lift to easily raise the front. The bike was very stable while on both lifts and I was able to easily remove the front wheel/tire. One helpful tip is to make sure when using the lift to adjust the 'fingers' on the lift to be wide enough to accommodate the width necessary to remove the wheel/tire assembly that includes the spacer and speedo drive. The lift is strong, stable, and easy to use.
Feb 25, 2022
Direct Replacement Part Fits Perfectly
This is a direct replacement part and met that expectation. The original mount bolt was missing when I bought my 2010 Mustang GT so I purchased this one. It fits perfectly and is as strong and durable as you would expect from a direct replacement part.
Mar 10, 2021
Well Built Master Cylinder
I decided to purchase this new master cylinder instead of rebuilding my old one. I found it to be well built and as solid as the original. It is packaged with a plug and a cap to protect the inside and keep the inner components fresh. Installing was easy and bleeding the rear brake after installing was also fairly straight forward. The rear brake is now firm and with good stopping power. As a side note, I recommend you replace the bleeder on the rear caliper with a speed bleeder at the same time you are changing out the master cylinder in order to simplify the brake fluid bleeding process.