About
Reviews (8)
Aug 26, 2020
Works great, but yellow spouts only.
It works great! My chilton 2.5gal (model p25) gas can nozzle broke off and I ordered a replacement nozzle kit. I Did not realize it was a different size completely. I ordered this adapter and it worked perfectly. Fits the yellow larger thread gas can cap only. The black ones have finer threads. If you buy a universal kit, make sure it has the yellow cap. The quality is great, the one I bought was Chilton brand and the rubber seal was a full 1/4 inch thick so I'm convinced it will hold up.
Oct 24, 2019
Great quality and good price.
5 of 6 found this helpful I know the price seems steep for these types od bulbs, but you get what you pay for. The led bulbs are very bright, but not blinding to anyone. You can certainly tell they are working because they hit reflective signs further away than my headlights do. I touched my lenses in front of the bulbs and the old glass style bulbs I have as turn signals were very warm but the lenses in front of these led bulbs were actually cold to the touch. They produce so little heat. Used one set as reverse lights and they can even be seen through my tinted windows so I don't need to roll down the windows to back up at night. They also work well to provide light at night.
Over all, they were easy to install, non polorized so you cannot install backwards and they are super bright and don't produce much heat. Well worth the price for sure and easy to use.
Apr 21, 2019
Very good product for the money.
3 of 3 found this helpful At first I was scepticle on getting the soldering station, but after looking for good soldering stations for a good price online this one hit every review top 10 list. I'm used to working with those cheap 10-20 dollar pencil irons you get from local stores but as my projects get more complex and contain more sensitive parts I needed something that could deliver a much better soldering experience. The pencil irons I was used to using did not have a set heat up time and often times would not be hot enough to melt solder and would make me wait. Now for the actual review. The price was more than I planned to spend on an iron but it was still priced much better than most stations with similar setups and features. However, after purchasing the soldering station I was truly impressed. The flux it comes with is good quality, the brass sponge works wonders and the iron itself is sturdy. When I turn it on, it takes about 15-20 seconds to get to temperature but after that it takes about 10 seconds to go up in temperature which is alot faster than a pencil iron. A big bulky soldering gun might beat it in speed but those things are so heavy and hard to work with and are almost useless for precision where this station is not. It is super light weight, feels comfortable in your hands and it gets hot quick. The temperature control dial is a little sensitive so if you touch is by accident it will adjust the temperature a few degrees. The iron holding stand is great because I can solder, spong the tip and stick it in there and the tip won't touch anything. Makes it easier than a lay down stand that you get with pencil irons. It's quality is good and you have plenty of reach between the power cable and the iron's cable. The solder roll holder on the side is a super bonus feature to me because I'm constantly picking up my rolls and cutting or melting some solder off so having it on a roll means it's alot easier because I can grab the roll, spin it and I've got solder. No more setting the iron down to locate the roll of solder then pulling it out and then picking up the iron to melt it apart. The rubber feet it comes with work well, it doesn't slide on my desk at all which is great because I've been burned a few times from irons sliding around on me. This one stays where you put it.
Over all,
It has great features, it's very well made, they actually put though into the design, it comes with alot of stuff for your money, it has features that I haven't seen on any others and it gets hot very quickly. The heating element and tips are replaceable so it's a long term iron and not a throw away for sure. Might buy another as a gift for a friend who solders alot.